Minimax SC 3C (2.6m) Panel Saw
The minimax sc 3 classic, the most compact sliding table saw for handling full-sized sheets. With a 2660mm sliding table stroke, it easily rips down 2400mm lengths, maximizing panel yield. Ideal for faced boards, it features a large crosscut fence, flip-over stops, and an oversized outrigger support table. With an aluminum sliding table, 300mm blade capacity, and scoring saw, it delivers precise performance. The 1270mm ripping capacity and scratch-free operation make it a reliable choice.
- Very high effective saw unit exhaust hood: the emission level is 90% lower with respect to the maximum level allowed by the European safety regulations!
- The sliding carriage ensures top quality precision, smooth and silent action, self-cleaning dustproof system, long lasting accuracy, no adjustments required.
- The sliding carriage is equipped with an additional table for the support of large dimensioned panels.
- The telescopic squaring rule is equipped with 2 flip-over stops which allow to have precise references that can be used for both profiles.
- The angular cutting device with flip-over stops allows to rapidly perform mitre cuts without moving the squaring fence and it is very useful for small work pieces
- Absolute precision and rapid positioning of the parallel fence which slides on a ground steel round bar
- Extruded aluminum fences with support and rapid locking guarantee maximum practicality.
$11,200.00
Out of stock
Additional Information
Performance without limitsIncredible cutting of both very thick solid wood and panels, even those veneered, thanks to the new saw unit with a blade that has a maximum diameter of 315 mm that grants a 100 mm cutting height with the scoring blade installed.
ExclusiveEasier and more precise cutting is possible due to a perfectly stable support that is guaranteed, even for large work pieces, the wide sliding table and the large squaring frame fence provided as st+W30andard. Top quality precision, smooth and silent action, self-cleaning dustproof system, long lasting accuracy, no adjustment required.
The tableThe table is made of extruded anodized aluminium with a closed honeycomb structure. The sliding table runs on an exclusive slideway system consisting of calibrated and hardened F550 SX
| TECHNICAL DATA | ||
| Max. sawblade diameter | mm / inches | 315 / 12 |
| Sawblade arbor size | mm / inches | 30 / 1.18 |
| Max. sawblade projection from table at 90°/45° | mm / inches | 100/78 3.94/3.07 |
| Cutting width on parallel fence (Rip capacity) | mm / inches | 1270 / 50 |
| Max. squaring stroke of sliding table saw | mm / ft | 1600 / 5.5 |
| Single-phase motor | kW/Hp | 2.2/3 |
